S&S Cycle Camshaft Kit MR 103 Standard Chain Drive
S&S Cycle Camshaft Kit MR 103 Standard Chain Drive
Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam’s direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
Cam bearings and gaskets must be replaced when installing new cams
Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
Due to the inherent characteristics of gear drives, you may experience more valve train noise.
Use with stock heads and low restriction intake and exhaust
Broad torque curve improves output over stock over the entire rpm range
Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
Made in the U.S.A.
Delenummer: 09251143
MR103 Cam Kit, 2006-2017 Twin Cam
6.500kr
Relaterte produkter
-
S&S Cycle Camshaft Set 509C Chain-Driven
6.500kr Legg til i handlekurv -
S&S Cycle Cam Chest Kit 465C Oil Cooled Black M8
27.300kr Legg til i handlekurv -
S&S Cycle Camshaft Set 583C Chain-Driven
6.500kr Legg til i handlekurv -
Feuling Oil Pump Corp. Hydraulic Camshaft Chain Tensioner Conversion Kit OE+
13.500kr Legg til i handlekurv